Degreasing agent
detail
Degreasing agent
This product contains the strong penetration of the surface active agent, instead of gasoline; organic solvents such as kerosene skim the workpiece with degreasing fast, easy to rinse after cleaning residues and other features, and applies to the cleaning of stainless steel, carbon steel and other metals.
A: technical indicators
Appearance: white powder
Preparation of proportion :30-50KG / T
Operating temperature: room temperature or 55-65 ° C
PH value :8-9
Processing time :1-2 minutes
II: the process parameters
Soaking concentration of 3-5%
Time :3-5 minutes
Temperature :50-60 ℃
Ultrasonic concentration :2-3%
Time :1-2 minutes
Temperature :50-60 ℃
Three: the use of
1: Bath preparation 50% of the added water to the degreasing tank, then a certain amount of degreasing agent slowly added to the water edge and stirring, and finally adding water to the whole amount to be mixed evenly.
2: adjustment of the bath Due to continuous use, the bath concentration decreased, the periodic determination of the alkalinity of the bath to control the concentration in the use of technology within. Per ton bath of this agent the 3.6KG allows free alkalinity increases by about a point.
3: an update of the bath The after prolonged use, slot solution become dirty, and the greasy dirt content was too large, resulting in to the aging of the skim force. At this time, even if supplementary degreasing agent can not recover degreasing capacity, you should replace the bath
With fresh water after use, clean up, to avoid the impact of the product.